China graphite susceptor Manufacturers, Suppliers, Factory

By 2027, solar photovoltaic (PV) will overtake coal as the world's largest installed capacity. The cumulative installed capacity of solar PV nearly triples in our forecast, growing by nearly 1,500 gigawatts over this period, and will surpass natural gas by 2026 and coal by 2027.

In semiconductor fabrication, etching is one of the major steps, along with photolithography and thin-film deposition. It involves removing unwanted materials from the surface of a wafer using chemical or physical methods. This step is carried out after coating, photolithography, and developing. It is used to remove the exposed thin film material, leaving only the desired portion of the wafer, and then removing the excess photoresist. These steps are repeated numerous times to create complex integrated circuits.

There are several materials currently under investigation, among which silicon carbide stands out as one of the most promising. Similar to GaN, it boasts higher operating voltages, higher breakdown voltages, and superior conductivity compared to silicon. Moreover, thanks to its high thermal conductivity, silicon carbide can be utilized in environments with extreme temperatures. Lastly, it is significantly smaller in size yet capable of handling greater power.

In traditional silicon power device fabrication, high-temperature diffusion and ion implantation stand as the primary methods for dopant control, each with its advantages and disadvantages. Typically, high-temperature diffusion is characterized by its simplicity, cost-effectiveness, isotropic dopant distribution profiles, and lower introduction of lattice damage. Conversely, ion implantation, though complex and costly, enables precise independent control over dopant concentration and depth but introduces a significant number of point defects and extended defects into the substrate.

Silicon carbide (SiC) power devices are semiconductor devices made of silicon carbide materials, mainly used in high-frequency, high-temperature, high-voltage and high-power electronic applications. Compared with traditional silicon (Si)-based power devices, silicon carbide power devices have higher bandgap width, higher critical breakdown electric field, higher thermal conductivity and higher saturated electron drift velocity, which makes them have great development potential and application value in the field of power electronics.

Within the silicon carbide (SiC) industry chain, substrate suppliers hold significant leverage, primarily due to value distribution. SiC substrates account for 47% of the total value, followed by epitaxial layers at 23%, while device design and manufacturing constitute the remaining 30%. This inverted value chain stems from the high technological barriers inherent to substrate and epitaxial layer production. Three major challenges plague SiC substrate growth: stringent growth conditions, slow growth rates, and demanding crystallographic requirements. These complexities contribute to increased processing difficulty, ultimately resulting in low product yields and high costs. Furthermore, the epitaxial layer’s thickness and doping concentration are critical parameters directly impacting the final device performance.