China GaN Etch for LEDs Manufacturers, Suppliers, Factory

Semiconductor ceramic parts belong to advanced ceramics and are an indispensable part of the semiconductor manufacturing process. The raw materials for preparation are usually high-purity, ultra-fine inorganic materials, such as aluminum oxide, silicon carbide, aluminum nitride, silicon nitride, yttrium oxide, zirconium oxide, etc.

Currently, most SiC substrate manufacturers use a new crucible thermal field process design with porous graphite cylinders: placing high-purity SiC particle raw materials between the graphite crucible wall and the porous graphite cylinder, while deepening the entire crucible and increasing the crucible diameter.

To achieve the high-quality requirements of IC chip circuit processes with line widths smaller than 0.13μm to 28nm for 300mm diameter silicon polishing wafers, it is essential to minimize contamination from impurities, such as metal ions, on the wafer's surface.

The silicon carbide industry involves a chain of processes that include substrate creation, epitaxial growth, device design, device manufacturing, packaging, and testing. In general, silicon carbide is created as ingots, which are then sliced, ground, and polished to produce a silicon carbide substrate.

The third generation of semiconductor materials AlN belongs to the direct bandgap semiconductor, its bandwidth of 6.2 eV, with high thermal conductivity, resistivity, breakdown field strength, as well as excellent chemical and thermal stability, is not only an important blue light, ultraviolet materials, or electronic devices and integrated circuits, important packaging, dielectric isolation and insulation materials, especially for high-temperature high-power devices. In addition, AlN and GaN have a good thermal match and chemical compatibility, AlN used as GaN epitaxial substrate, can significantly reduce the defect density in GaN devices, improve device performance.