China Mechanical Seal Components Manufacturers, Suppliers, Factory

Chemical Vapor Deposition (CVD) refers to a process technology where multiple gaseous reactants at varied partial pressures undergo a chemical reaction under specific temperature and pressure conditions. The resulting solid substance deposits on the surface of the substrate material, thereby obtaining the desired thin film. In traditional integrated circuit manufacturing processes, the obtained thin film materials are generally compounds such as oxides, nitrides, carbides, or materials like polycrystalline silicon, amorphous silicon, etc.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The U.S. Department of Energy (DOE) recently confirmed a $544 million loan to SK Siltron, a semiconductor wafer manufacturer under SK Group.

The wafer notch is a V-shaped or U-shaped groove on the edge of a semiconductor wafer. Far from being a defect incurred during the manufacturing process, it is the critical structural marker that was intentionally designed, whose core function lies in enabling precise positioning and orientation identification of the wafer. Wafer flat was used as the orientation marking in the early stages of wafer technology development. However, as wafer sizes gradually increased, the flat-edge design occupied more effective area, thus being gradually replaced by the more compact notch.