China MOCVD Middle Heater Manufacturers, Suppliers, Factory

There are several materials currently under investigation, among which silicon carbide stands out as one of the most promising. Similar to GaN, it boasts higher operating voltages, higher breakdown voltages, and superior conductivity compared to silicon. Moreover, thanks to its high thermal conductivity, silicon carbide can be utilized in environments with extreme temperatures. Lastly, it is significantly smaller in size yet capable of handling greater power.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The processing of 4H-SiC substrate mainly includes the following steps:

Carbon-based materials such as graphite, carbon fibers, and carbon/carbon (C/C) composites are known for their high specific strength, high specific modulus, and excellent thermal properties, making them suitable for a wide range of high-temperature applications. These materials are widely utilized in aerospace, chemical engineering, and energy storage. However, their susceptibility to oxidation and corrosion in high-temperature environments, along with poor scratch resistance, restricts their further application.

Carbon fiber (CF) is a type of fibrous material that contains over 95% carbon.

One of the unique properties of semiconductor materials is that their conductivity, as well as their conductivity type (N-type or P-type), can be created and controlled through a process called doping. This involves introducing specialized impurities, known as dopants, into the material to form junctions on the surface of the wafer. The industry employs two main doping techniques: thermal diffusion and ion implantation.