China Epitaxy Semiconductor Manufacturers, Suppliers, Factory

To achieve the high-quality requirements of IC chip circuit processes with line widths smaller than 0.13μm to 28nm for 300mm diameter silicon polishing wafers, it is essential to minimize contamination from impurities, such as metal ions, on the wafer's surface.

SiC's own characteristics determine its single crystal growth is more difficult. Due to the absence of Si:C=1:1 liquid phase at atmospheric pressure, the more mature growth process adopted by the mainstream of the semiconductor industry can not be used to grow the more mature growth method-straight pulling method, the descending crucible method and other methods for growth. After theoretical calculations, only when the pressure is greater than 105 atm and the temperature is higher than 3200 ℃, can we get the stoichiometric ratio of Si:C = 1:1 solution. pvt method is currently one of the more mainstream methods.

Silicon material is a solid material with certain semiconductor electrical properties and physical stability, and provides substrate support for the subsequent integrated circuit manufacturing process. It is a key material for silicon-based integrated circuits. More than 95% of semiconductor devices and more than 90% of integrated circuits in the world are made on silicon wafers.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The current third-generation semiconductors are primarily based on Silicon Carbide, with substrates accounting for 47% of device costs, and epitaxy accounting for 23%, totaling approximately 70% and forming the most crucial part of the SiC device manufacturing industry.

Semicorex's SiC crystal growth furnace component, the porous graphite barrel, will bring three major benefits and can effectively strengthen the competitiveness of domestic SiC substrates: