China Alumina end effector Manufacturers, Suppliers, Factory

The wafer boats, loaded with a batch of wafers to be processed, are positioned on long cantilevered paddles.

The third generation of semiconductor materials AlN belongs to the direct bandgap semiconductor, its bandwidth of 6.2 eV, with high thermal conductivity, resistivity, breakdown field strength, as well as excellent chemical and thermal stability, is not only an important blue light, ultraviolet materials, or electronic devices and integrated circuits, important packaging, dielectric isolation and insulation materials, especially for high-temperature high-power devices. In addition, AlN and GaN have a good thermal match and chemical compatibility, AlN used as GaN epitaxial substrate, can significantly reduce the defect density in GaN devices, improve device performance.

Tantalum carbide coating is an important high-strength, corrosion-resistant and chemically stable high-temperature structural material with a melting point of up to 4273 °C, one of the several compounds with the highest temperature resistance. It has excellent high-temperature mechanical properties, resistance to high-speed airflow scouring, ablation resistance, and good chemical and mechanical compatibility with graphite and carbon/carbon composites. Therefore, in the epitaxial process of GaN LEDs and SiC power devices such as MOCVD, TaC coating has excellent acid and alkali resistance to H2, HCl, NH3, which can completely protect the graphite substrate material and purify the growth environment.

At first glance, quartz (SiO2) material looks very similar to glass, but what is special is that ordinary glass is composed of many components (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.), while quartz only contains SiO2, and its microstructure is a simple network composed of silicon dioxide tetrahedral structural units.

To achieve the high-quality requirements of IC chip circuit processes with line widths smaller than 0.13μm to 28nm for 300mm diameter silicon polishing wafers, it is essential to minimize contamination from impurities, such as metal ions, on the wafer's surface.

According to reports from German media, U.S. chip manufacturer Wolfspeed is pausing its plans to build a semiconductor plant in Germany.