China SiC processing Tray Manufacturers, Suppliers, Factory

Defect-free epitaxial growth occurs when one crystal lattice has nearly identical lattice constants to another. Growth happens when lattice sites of the two lattices at the interface region are approximately matched, which is possible with a small lattice mismatch (less than 0.1%). This approximate matching is achieved even with elastic strain at the interface, where each atom is slightly displaced from its original position in the boundary layer. While a small amount of strain is tolerable for thin layers and even desirable for quantum well lasers, the strain energy stored in the crystal is generally lowered by the formation of misfit dislocations, which involve a missing row of atoms in one lattice.

Graphitising is the process of transforming non-graphitic charcoal into graphitic charcoal with graphite three-dimensional regular ordered structure by high-temperature heat treatment, making full use of electrical resistance heat to heat the charcoal material to 2300~3000 ℃, and transforming the charcoal with amorphous chaotic layer structure into ordered graphite crystalline structure.

We know that further epitaxial layers need to be built on top of some wafer substrates for device fabrication, typically LED light-emitting devices, which require GaAs epitaxial layers on top of silicon substrates; SiC epitaxial layers are grown on top of conductive SiC substrates for building devices such as SBDs, MOSFETs, etc. for high voltage, high current and other power applications; GaN epitaxial layers are built on top of semi-insulating SiC substrates for building HEMTs and other RF applications.

Wide bandgap (WBG) semiconductors such as Silicon Carbide (SiC) and Gallium Nitride (GaN) are expected to play an increasingly important role in power electronic devices. They offer several advantages over traditional Silicon (Si) devices, including higher efficiency, power density, and switching frequency. Ion implantation is the primary method for achieving selective doping in Si devices. However, there are some challenges when applying it to wide bandgap devices. In this article, we will focus on some of these challenges and summarize their potential applications in GaN power devices.

At first glance, quartz (SiO2) material looks very similar to glass, but what is special is that ordinary glass is composed of many components (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.), while quartz only contains SiO2, and its microstructure is a simple network composed of silicon dioxide tetrahedral structural units.

The current third-generation semiconductors are primarily based on Silicon Carbide, with substrates accounting for 47% of device costs, and epitaxy accounting for 23%, totaling approximately 70% and forming the most crucial part of the SiC device manufacturing industry.