China sealing ring Manufacturers, Suppliers, Factory

The growth of GaN epitaxy on GaN substrate presents a unique challenge, despite the material’s superior properties when compared to silicon. GaN epitaxy offers significant advantages in terms of band gap width, thermal conductivity, and breakdown electric field over silicon-based materials. This makes the adoption of GaN as the backbone for the third generation of semiconductors, which provide enhanced cooling, lower conduction loss, and improved performance under high temperatures and frequencies, a promising and crucial advancement for the photonic and micro-electronic industries.

The thermal conductivity of bulk 3C-SiC, recently measured, is the second-highest among inch-scale large crystals, ranking just below diamond. Silicon carbide (SiC) is a wide bandgap semiconductor extensively used in electronic applications, and it exists in various crystalline forms known as polytypes. Managing high localized heat flux is a significant challenge in power electronics, as it can lead to device overheating and long-term performance and reliability issues.

The first generation of semiconductor materials is mainly represented by silicon (Si) and germanium (Ge), which began to rise in the 1950s. Germanium was dominant in the early days and was mainly used in low-voltage, low-frequency, medium-power transistors and photodetectors, but due to its poor high temperature resistance and radiation resistance, it was gradually replaced by silicon devices in the late 1960s. Silicon is still the main semiconductor material in the field of microelectronics due to its high technological maturity and cost advantages.

The development of 3C-SiC, a significant polytype of silicon carbide, reflects the continuous advancement of semiconductor material science. In the 1980s, Nishino et al. first achieved a 4 μm thick 3C-SiC film on a silicon substrate using chemical vapor deposition (CVD)[1], laying the foundation for 3C-SiC thin-film technology.

Carbon fiber (CF) is a type of fibrous material that contains over 95% carbon.

Silicon carbide substrate is a compound semiconductor single crystal material composed of two elements, carbon and silicon. It has the characteristics of large bandgap, high thermal conductivity, high critical breakdown field strength, and high electron saturation drift rate.