China Silicon Carbide Tray Manufacturers, Suppliers, Factory

Currently, many semiconductor devices employ mesa device structures, which are predominantly created through two types of etching: wet etching and dry etching. While the simple and rapid wet etching plays a significant role in semiconductor device fabrication, it has inherent drawbacks such as isotropic etching and poor uniformity, which result in limited control when transferring small-sized patterns. Dry etching, however, with its high anisotropy, good uniformity, and repeatability, has become prominent in semiconductor device fabrication processes. The term “dry etching” broadly refers to any non-wet etching technology used for removing surface materials and transferring micro and nano patterns, including laser etching, plasma etching, and chemical vapor etching. The dry etching discussed in this text specifically pertains to the narrow application of processes using plasma discharge—either physical or chemical—to modify material surfaces.

Epitaxial wafer process is a critical technique used in semiconductor manufacturing. It involves the growth of a thin layer of crystal material on top of a substrate, which has the same crystal structure and orientation as the substrate. This process creates a high-quality interface between the two materials, allowing for the development of advanced electronic devices.

Isostatic graphite is a type of graphite with an ultra-fine grain. It is used for applications where the mechanical properties of other fine-grained graphites are inadequate.

In traditional silicon power device fabrication, high-temperature diffusion and ion implantation stand as the primary methods for dopant control, each with its advantages and disadvantages. Typically, high-temperature diffusion is characterized by its simplicity, cost-effectiveness, isotropic dopant distribution profiles, and lower introduction of lattice damage. Conversely, ion implantation, though complex and costly, enables precise independent control over dopant concentration and depth but introduces a significant number of point defects and extended defects into the substrate.

In semiconductor manufacturing, ion implantation involves using high-energy accelerators to inject specific impurity atoms, such as arsenic or boron, into a silicon substrate.

In the field of single crystal growth, the temperature distribution within the crystal growth furnace plays a critical role. This temperature distribution, commonly referred to as the thermal field, is a vital factor that influences the quality and characteristics of the crystal being grown. The thermal field can be categorized into two types: static and dynamic.