China Ceramic Robot Finger Manufacturers, Suppliers, Factory

The application areas of SiC-based and Si-based GaN are not strictly separated. In GaN-On-SiC devices, the cost of SiC substrate is relatively high, and with the growing maturity of SiC long crystal technology, the cost of the device is expected to fall further, and it is used in power devices in the field of power electronics.

The tray (base) that supports SiC wafers, also known as a "susceptor," is a core component of semiconductor manufacturing equipment. And what exactly is this susceptor that carries the wafers?

Currently, many semiconductor devices employ mesa device structures, which are predominantly created through two types of etching: wet etching and dry etching. While the simple and rapid wet etching plays a significant role in semiconductor device fabrication, it has inherent drawbacks such as isotropic etching and poor uniformity, which result in limited control when transferring small-sized patterns. Dry etching, however, with its high anisotropy, good uniformity, and repeatability, has become prominent in semiconductor device fabrication processes. The term “dry etching” broadly refers to any non-wet etching technology used for removing surface materials and transferring micro and nano patterns, including laser etching, plasma etching, and chemical vapor etching. The dry etching discussed in this text specifically pertains to the narrow application of processes using plasma discharge—either physical or chemical—to modify material surfaces.

Electrostatic chucks (ESCs) have become indispensable in semiconductor manufacturing and flat panel display production, offering a damage-free, highly controllable method for holding and positioning delicate wafers and substrates during critical processing steps. This article delves into the intricacies of ESC technology, exploring its principles of operation, various adhesion mechanisms, and fundamental structural components.

When producing large-sized GaN single crystal substrates, HVPE is currently the best choice for commercialization. However, the back carrier concentration of the grown GaN cannot be precisely controlled.

In semiconductor manufacturing, the precision and stability of the etching process are paramount. One critical factor in achieving high-quality etching is ensuring that wafers are perfectly flat on the tray during the process.