China Silicon Carbide SiC Cantilever Paddle Manufacturers, Suppliers, Factory

The third generation of semiconductor materials AlN belongs to the direct bandgap semiconductor, its bandwidth of 6.2 eV, with high thermal conductivity, resistivity, breakdown field strength, as well as excellent chemical and thermal stability, is not only an important blue light, ultraviolet materials, or electronic devices and integrated circuits, important packaging, dielectric isolation and insulation materials, especially for high-temperature high-power devices. In addition, AlN and GaN have a good thermal match and chemical compatibility, AlN used as GaN epitaxial substrate, can significantly reduce the defect density in GaN devices, improve device performance.

The coated parts in semiconductor silicon single crystal hot field are generally coated by CVD method, including pyrolytic carbon coating, Silicon Carbide coating and Tantalum Carbide coating, each with different characteristics.

Recently, our company announced that the company has successfully developed a 6-inch Gallium Oxide single crystal using the casting method, becoming the first domestic industrialized company to master the 6-inch Gallium Oxide single crystal substrate preparation technology.

Silicon Carbide generally uses the PVT method, with a temperature of more than 2000 degrees, a long processing cycle, and low output, so the cost of Silicon Carbide substrates is very high.

Defect-free epitaxial growth occurs when one crystal lattice has nearly identical lattice constants to another. Growth happens when lattice sites of the two lattices at the interface region are approximately matched, which is possible with a small lattice mismatch (less than 0.1%). This approximate matching is achieved even with elastic strain at the interface, where each atom is slightly displaced from its original position in the boundary layer. While a small amount of strain is tolerable for thin layers and even desirable for quantum well lasers, the strain energy stored in the crystal is generally lowered by the formation of misfit dislocations, which involve a missing row of atoms in one lattice.

Carbon-based materials such as graphite, carbon fibers, and carbon/carbon (C/C) composites are known for their high specific strength, high specific modulus, and excellent thermal properties, making them suitable for a wide range of high-temperature applications. These materials are widely utilized in aerospace, chemical engineering, and energy storage. However, their susceptibility to oxidation and corrosion in high-temperature environments, along with poor scratch resistance, restricts their further application.