China quartz crystal Manufacturers, Suppliers, Factory

The liquid phase method is closer to the thermodynamic equilibrium conditions and is able to grow SiC crystals with better quality.

Quartz (SiO₂) material is very similar to glass at first glance, but the special thing is that the general glass is made up of many components (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.), while the quartz contains only SiO₂ components, and the microstructure of its silicon dioxide tetrahedral structural units composed of a simple network.

SiC's own characteristics determine its single crystal growth is more difficult. Due to the absence of Si:C=1:1 liquid phase at atmospheric pressure, the more mature growth process adopted by the mainstream of the semiconductor industry can not be used to grow the more mature growth method-straight pulling method, the descending crucible method and other methods for growth. After theoretical calculations, only when the pressure is greater than 105 atm and the temperature is higher than 3200 ℃, can we get the stoichiometric ratio of Si:C = 1:1 solution. pvt method is currently one of the more mainstream methods.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

Silicon carbide (SiC) power devices are semiconductor devices made of silicon carbide materials, mainly used in high-frequency, high-temperature, high-voltage and high-power electronic applications. Compared with traditional silicon (Si)-based power devices, silicon carbide power devices have higher bandgap width, higher critical breakdown electric field, higher thermal conductivity and higher saturated electron drift velocity, which makes them have great development potential and application value in the field of power electronics.