China Fuel Cell Manufacturers, Suppliers, Factory

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The coated parts in semiconductor silicon single crystal hot field are generally coated by CVD method, including pyrolytic carbon coating, Silicon Carbide coating and Tantalum Carbide coating, each with different characteristics.

As technology nodes continue to shrink, the formation of ultra-shallow junctions presents significant challenges. Thermal annealing processes including Rapid thermal annealing (RTA) and flash lamp annealing (FLA) are vital techniques that maintain high impurity activation rates while minimizing diffusion, ensuring optimal device performance.

In traditional silicon power device fabrication, high-temperature diffusion and ion implantation stand as the primary methods for dopant control, each with its advantages and disadvantages. Typically, high-temperature diffusion is characterized by its simplicity, cost-effectiveness, isotropic dopant distribution profiles, and lower introduction of lattice damage. Conversely, ion implantation, though complex and costly, enables precise independent control over dopant concentration and depth but introduces a significant number of point defects and extended defects into the substrate.

Silicon is the second most abundant element on Earth after oxygen. Most silicon is found in soil, rocks, natural water, trees, and plants.

Semiconductor materials can be divided into three generations according to the time sequence. The first generation of germanium, silicon and other common monomaterials, which is characterised by convenient switching, generally used in integrated circuits. The second generation of gallium arsenide, indium phosphide and other compound semiconductors, mainly used for light-emitting and communication materials.