China Etch Carrier ICP PSS Manufacturers, Suppliers, Factory

Recently, our company announced that the company has successfully developed a 6-inch Gallium Oxide single crystal using the casting method, becoming the first domestic industrialized company to master the 6-inch Gallium Oxide single crystal substrate preparation technology.

Recently, the semiconductor industry has continued to pay increasing attention to Gallium Nitride (GaN) technology. Due to its excellent electronic properties, Gallium Nitride devices have important applications in many high-tech fields:

GaN materials gained prominence following the awarding of the 2014 Nobel Prize in Physics for blue LEDs. Initially entering the public eye through fast-charging applications in consumer electronics, GaN-based power amplifiers and RF devices have also quietly emerged as critical components in 5G base stations. In recent years, GaN-based automotive-grade power devices have shown promise, potentially opening new growth avenues for GaN material applications.

Currently, many semiconductor devices employ mesa device structures, which are predominantly created through two types of etching: wet etching and dry etching. While the simple and rapid wet etching plays a significant role in semiconductor device fabrication, it has inherent drawbacks such as isotropic etching and poor uniformity, which result in limited control when transferring small-sized patterns. Dry etching, however, with its high anisotropy, good uniformity, and repeatability, has become prominent in semiconductor device fabrication processes. The term “dry etching” broadly refers to any non-wet etching technology used for removing surface materials and transferring micro and nano patterns, including laser etching, plasma etching, and chemical vapor etching. The dry etching discussed in this text specifically pertains to the narrow application of processes using plasma discharge—either physical or chemical—to modify material surfaces.

The current third-generation semiconductors are primarily based on Silicon Carbide, with substrates accounting for 47% of device costs, and epitaxy accounting for 23%, totaling approximately 70% and forming the most crucial part of the SiC device manufacturing industry.

Silicon Carbide (SiC) single crystals are primarily produced using the sublimation method. After removing the crystal from the crucible, several intricate processing steps are required to create usable wafers.