China Ceramic Vacuum Chuck For Wafers Manufacturers, Suppliers, Factory

Quartz (SiO₂) material is very similar to glass at first glance, but the special thing is that the general glass is made up of many components (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.), while the quartz contains only SiO₂ components, and the microstructure of its silicon dioxide tetrahedral structural units composed of a simple network.

Chemical Vapor Deposition (CVD) refers to a process technology where multiple gaseous reactants at varied partial pressures undergo a chemical reaction under specific temperature and pressure conditions. The resulting solid substance deposits on the surface of the substrate material, thereby obtaining the desired thin film. In traditional integrated circuit manufacturing processes, the obtained thin film materials are generally compounds such as oxides, nitrides, carbides, or materials like polycrystalline silicon, amorphous silicon, etc.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The history of silicon carbide (SiC) dates back to 1891, when Edward Goodrich Acheson accidentally discovered it while attempting to synthesize artificial diamonds. Acheson heated a mixture of clay (aluminosilicate) and powdered coke (carbon) in an electric furnace. Instead of the expected diamonds, he obtained a bright green crystal adhering to the carbon. This crystal had a hardness second only to diamond, and was thus named carborundum. In 1904, French-Jewish chemist Henri Moissan discovered rare natural silicon carbide minerals while studying meteorite samples from the Diablo Canyon in Arizona, USA. He named these minerals moissanite, and his discovery earned him the 1906 Nobel Prize in Chemistry.

Silicon carbide (SiC) is highly favored in the semiconductor industry for its excellent physical and chemical properties. However, the high hardness and brittleness of SiC pose considerable challenges to its processing.

​As the world searches for new opportunities in the semiconductor field, Gallium Nitride (GaN) continues to stand out as a potential candidate for future power and RF applications. However, despite its numerous benefits, GaN faces a significant challenge: the absence of P-type products. Why is GaN hailed as the next major semiconductor material, why is the lack of P-type GaN devices a critical drawback, and what does this mean for future designs?