China PAN-based graphitic carbon felt Manufacturers, Suppliers, Factory

In semiconductor fabrication, etching is one of the major steps, along with photolithography and thin-film deposition. It involves removing unwanted materials from the surface of a wafer using chemical or physical methods. This step is carried out after coating, photolithography, and developing. It is used to remove the exposed thin film material, leaving only the desired portion of the wafer, and then removing the excess photoresist. These steps are repeated numerous times to create complex integrated circuits.

In order to introduce the SiC coated graphite susceptor, it's important to understand its application. When manufacturing devices, further epitaxial layers are required to be built on some wafer substrates.

Chemical Vapor Deposition (CVD) refers to a process technology where multiple gaseous reactants at varied partial pressures undergo a chemical reaction under specific temperature and pressure conditions. The resulting solid substance deposits on the surface of the substrate material, thereby obtaining the desired thin film. In traditional integrated circuit manufacturing processes, the obtained thin film materials are generally compounds such as oxides, nitrides, carbides, or materials like polycrystalline silicon, amorphous silicon, etc.

The most basic stage of all processes is the oxidation process. The oxidation process is to place the silicon wafer in an atmosphere of oxidants such as oxygen or water vapor for high-temperature heat treatment (800~1200℃), and a chemical reaction occurs on the surface of the silicon wafer to form an oxide film (SiO2 film).

Defect-free epitaxial growth occurs when one crystal lattice has nearly identical lattice constants to another. Growth happens when lattice sites of the two lattices at the interface region are approximately matched, which is possible with a small lattice mismatch (less than 0.1%). This approximate matching is achieved even with elastic strain at the interface, where each atom is slightly displaced from its original position in the boundary layer. While a small amount of strain is tolerable for thin layers and even desirable for quantum well lasers, the strain energy stored in the crystal is generally lowered by the formation of misfit dislocations, which involve a missing row of atoms in one lattice.

In semiconductor manufacturing, the precision and stability of the etching process are paramount. One critical factor in achieving high-quality etching is ensuring that wafers are perfectly flat on the tray during the process.