China carbon graphite bearing Manufacturers, Suppliers, Factory

SiC's own characteristics determine its single crystal growth is more difficult. Due to the absence of Si:C=1:1 liquid phase at atmospheric pressure, the more mature growth process adopted by the mainstream of the semiconductor industry can not be used to grow the more mature growth method-straight pulling method, the descending crucible method and other methods for growth. After theoretical calculations, only when the pressure is greater than 105 atm and the temperature is higher than 3200 ℃, can we get the stoichiometric ratio of Si:C = 1:1 solution. pvt method is currently one of the more mainstream methods.

Silicon carbide (SiC) is a material that possesses exceptional thermal, physical and chemical stability, exhibiting properties that go beyond those of conventional materials. Its thermal conductivity is an astonishing 84W/(m·K), which is not only higher than copper but also three times that of silicon. This demonstrates its enormous potential for use in thermal management applications.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

At first glance, quartz (SiO2) material looks very similar to glass, but what is special is that ordinary glass is composed of many components (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.), while quartz only contains SiO2, and its microstructure is a simple network composed of silicon dioxide tetrahedral structural units.