China CCB brake disc Manufacturers, Suppliers, Factory

Tantalum carbide coating is an important high-strength, corrosion-resistant and chemically stable high-temperature structural material with a melting point of up to 4273 °C, one of the several compounds with the highest temperature resistance. It has excellent high-temperature mechanical properties, resistance to high-speed airflow scouring, ablation resistance, and good chemical and mechanical compatibility with graphite and carbon/carbon composites. Therefore, in the epitaxial process of GaN LEDs and SiC power devices such as MOCVD, TaC coating has excellent acid and alkali resistance to H2, HCl, NH3, which can completely protect the graphite substrate material and purify the growth environment.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The single crystal growth furnace is composed of six key systems that work in harmony to ensure efficient and high-quality crystal growth.

In semiconductor manufacturing, the precision and stability of the etching process are paramount. One critical factor in achieving high-quality etching is ensuring that wafers are perfectly flat on the tray during the process. Any deviation can lead to uneven ion bombardment, causing undesirable angles and variations in etching rates. To address these challenges, engineers have developed Electrostatic Chucks (ESCs), which have significantly improved etching quality and stability. This article delves into the design and functionality of ESCs, focusing on one key aspect: the electrostatic principles behind wafer adhesion.

Currently, silicon carbide (SiC) is a highly active area of research in thermal conductive ceramic materials both domestically and internationally.