China al2o3 sic composite ceramic Manufacturers, Suppliers, Factory

The third generation of semiconductor materials AlN belongs to the direct bandgap semiconductor, its bandwidth of 6.2 eV, with high thermal conductivity, resistivity, breakdown field strength, as well as excellent chemical and thermal stability, is not only an important blue light, ultraviolet materials, or electronic devices and integrated circuits, important packaging, dielectric isolation and insulation materials, especially for high-temperature high-power devices. In addition, AlN and GaN have a good thermal match and chemical compatibility, AlN used as GaN epitaxial substrate, can significantly reduce the defect density in GaN devices, improve device performance.

Tantalum carbide coating is an important high-strength, corrosion-resistant and chemically stable high-temperature structural material with a melting point of up to 4273 °C, one of the several compounds with the highest temperature resistance. It has excellent high-temperature mechanical properties, resistance to high-speed airflow scouring, ablation resistance, and good chemical and mechanical compatibility with graphite and carbon/carbon composites. Therefore, in the epitaxial process of GaN LEDs and SiC power devices such as MOCVD, TaC coating has excellent acid and alkali resistance to H2, HCl, NH3, which can completely protect the graphite substrate material and purify the growth environment.

SiC substrate material is the core of SiC chip. The production process of the substrate is: after obtaining the SiC crystal ingot through single crystal growth; then preparing the SiC substrate requires smoothing, rounding, cutting, grinding (thinning); mechanical polishing, chemical mechanical polishing; and cleaning, testing, etc. Process

Etching is an essential process in semiconductor manufacturing. This process can be categorized into two types: dry etching and wet etching. Each technique has its own advantages and limitations, making it crucial to understand the differences between them. So, how do you choose the best etching method? What are the pros and cons of dry etching and wet etching?

The development of 3C-SiC, a significant polytype of silicon carbide, reflects the continuous advancement of semiconductor material science. In the 1980s, Nishino et al. first achieved a 4 μm thick 3C-SiC film on a silicon substrate using chemical vapor deposition (CVD)[1], laying the foundation for 3C-SiC thin-film technology.