China Gan On Sic Wafer Manufacturers, Suppliers, Factory

Silicon material is a solid material with certain semiconductor electrical properties and physical stability, and provides substrate support for the subsequent integrated circuit manufacturing process. It is a key material for silicon-based integrated circuits. More than 95% of semiconductor devices and more than 90% of integrated circuits in the world are made on silicon wafers.

In semiconductor manufacturing, the precision and stability of the etching process are paramount. One critical factor in achieving high-quality etching is ensuring that wafers are perfectly flat on the tray during the process. Any deviation can lead to uneven ion bombardment, causing undesirable angles and variations in etching rates. To address these challenges, engineers have developed Electrostatic Chucks (ESCs), which have significantly improved etching quality and stability. This article delves into the design and functionality of ESCs, focusing on one key aspect: the electrostatic principles behind wafer adhesion.

The thermal conductivity of bulk 3C-SiC, recently measured, is the second-highest among inch-scale large crystals, ranking just below diamond. Silicon carbide (SiC) is a wide bandgap semiconductor extensively used in electronic applications, and it exists in various crystalline forms known as polytypes. Managing high localized heat flux is a significant challenge in power electronics, as it can lead to device overheating and long-term performance and reliability issues.

Isostatic graphite is a type of graphite with an ultra-fine grain. It is used for applications where the mechanical properties of other fine-grained graphites are inadequate.

Tantalum carbide coating is an important high-strength, corrosion-resistant and chemically stable high-temperature structural material with a melting point of up to 4273 °C, one of the several compounds with the highest temperature resistance. It has excellent high-temperature mechanical properties, resistance to high-speed airflow scouring, ablation resistance, and good chemical and mechanical compatibility with graphite and carbon/carbon composites. Therefore, in the epitaxial process of GaN LEDs and SiC power devices such as MOCVD, TaC coating has excellent acid and alkali resistance to H2, HCl, NH3, which can completely protect the graphite substrate material and purify the growth environment.

Compression molding, isostatic pressing, and rod extrusion are the three most common methods for producing graphite rods, similar to those used for creating graphite tubes.